sk8parks international
why choose sk8parksour product linesk8park designscontact ussite maphome
on the pipeline
bmx bikes, inline skates "Enclosed you will find the check for our new Skatepark. Once again we are very pleased with the service and equipment from your company. The kids are loving it!! Every evening and most efternoons you can find anywhere from 10-20 kids skateboarding there. Thank you again and I'm sure you will be hearing from us in the future for some smaller additions to our downtown."

Linda K. Ford
Clifford , MI
skate board, skateboard
skatepark skate park skate board park

sk8park news

GSA Schedule

skatepark, skate park

skate park, skatepark
All our obstacles are constructed of 100% heavy duty steel.
skate park, skatepark
SI skating surfaces have no wood or plastic, and no bolts or screws. We initially made wood structures, but discovered that they do not stand up to abuse and weather. Even 100% marine plywood with galvanized metal on all surfaces didn't last, because water would seep through the cracks and rot out the sub-floors. Wood and plastic products often crack and break, and they require screws that are a maintenance nightmare, requiring inspection and tightening on a regular basis. Screws can back out, heads snap off, and then kids get injured. If inspection is not performed, liability increases exponentially.

Concrete obstacles must be installed by qualified builders and an experienced crew, because mistakes made in concrete are expensive and permanent. Concrete will chip away and gouge with the use of trick pegs on bikes, and eventually become unsafe for skateboards and inline skates. Freeze/thaw cycles can also cause damage to concrete obstacles. There can be quite a bit of maintenance needed for concrete skate parks, and it can become very costly. Steel obstacles are less expensive and safer than concrete.

All our decks and transitions are 3/16" thick steel for maximum durability. Thinner 12 or 14 gauge steel will gouge and potentially deform over time due to heavy use and the trick pegs on bikes. All our obstacles are painted with V.O.C. compliant high gloss, heavy duty industrial enamel for durability. We also offer the smoothest riding surface available made with a proprietary formula ().

Steel is the strongest material and is long lasting. Steel parks can be reconfigured, are weatherproof, and very affordable.

Sk8parks International Mods are easy to install and require the least amount of maintenance of any skate ramp product you can purchase.


< Back to Filling the Need


660 Van Dyne Road, Fond du Lac, WI 54935
Toll Free Number: 877-891-1283 • Fax: 920-921-9566 • info@sk8parks.com


Skateboard Ramps & Obstacles | Skatepark Designs | Contact Sk8parks | Why Choose Sk8parks
Catch the Pipeline | Fill the Need | Sk8park News | In the Know | Rep Login | BCIBurke.com | Home


®Registered Trademark and ™Trademark of BCI Burke Company, LLC Fond du Lac, WI 54935
©2005 BCI Burke. All Rights Reserved.